The tank is manufactured from linear low density polyethylene (LLDPE) by rotational molding. LLDPE exhibits chemical resistance and is not easily attacked by strong acids and bases.
Enamel oven, with baking tray, grill and thermometer. Its modern and modern design makes it ideal for any home. Color combinations upon request.
Wall-Mounted Condensing Gas Boiler with Stainless Steel 4-Phase Alternator, Electronically Controlled Fan, Circulating Inverter, Electronic Display, Thermal Insulation with Aluminum Coating on the Boiler Walls, Possibility of Operation with WiFI Wireless Thermostat, Efficiency up to 108%, Electrical Protection IPX4D
ROOM THERMOSTAT WITH TEMPERATURE SENSOR
OPERATING RANGE FROM +5 TO +30 DEGREES CELSIUS
RIELLO GULLIVER BS1 16-52KW SINGLE STAGE GAS BURNER
Air/water Inverter Split Heat Pump for heating, cooling and sanitary hot water production, together with Sensys NET System Manager and external sensor for temperature regulation, with Built-in Boiler 180l and expansion tank 8l
MYTHERM SOLAR HEATER MADE OF STAINLESS STEEL, HIGH STRENGTH STEEL BOILER, DOUBLE ANODIC PROTECTION FROM ELECTROLYSIS
High Efficiency Floor Boiler suitable for Oil/Gas Pressurized Burners, 3 Passes for Hot Water Production, with G20 Precast Cast Iron Body, Assembled with Iron Breasts, Strapped, Rockwool Sheet Insulation with Special Tear Protection, with Simple Control Panel with Thermometer
HENRAD AIKMAN 11/400/400 270 KCAL/H INTERNAL LOOP PANEL HEATERS (VENTIL)
Gas Air Boiler Suitable for Indoor Spaces, Power 25KW, Consumption 1.76kg/h, Thermal Coverage 120m2, with a Maximum Height of 5 Meters so that the spread of heat is homogeneous, High Efficiency with Minimal Noise
PELLET Burner Maximum Thermal Power 40KW, with Efficiency Degree 86.67%, Maximum Coverage 756m3, Maximum PELLET Consumption 9.3kg/h, with 2-Screw Feeding System (one inside the Burner and one outside), Double Combustion Flame Head Resistant to High Temperatures, Connection Pipe 90°C, Safety Thermostat to Avoid Backflow, Photocell for Flame Control, Ignition with Electric Resistance
Air-heated PELLET Stove Thermal Power 2.2÷6.16KW, with Efficiency Degree 87.69%, Maximum Coverage 114 m3, PELLET Consumption 0.5÷1.38kg/h, with Refractory Ceramic Crystal up to 750°C, Body from 3mm steel and 25mm vermiculite in the Combustion Space, Easy-to-read User Display in 10 Languages, Start and Shutdown Timer, Intelligent Fault Diagnosis System
Floor Fan Coil Cooling Power 2KW, Thermal Power 4.91KW, Air Flow 400m3/h, Water Flow (Cooling) 344 l/h, Water Flow (Heating) 423 l/h, with Built-in Winter-Heat Thermostat, with Switch 3- Speed and Temperature Sensor 32°C for Connection to Heat Pump, with the Possibility of Adjusting the Fan Speeds, the Possibility of Switching the Water Inlet Left-Right During Installation
Ceramic Gas Mirrors for Commercial Spaces with Manual Ignition, Power 1.9÷2.9KW, Consumption 0.15÷0.23kg/h, Thermal Coverage 10m2, with 2 Ceramic Tiles
24KW thermal efficiency gas water heater, 72.2% efficiency, 12 l/min hot water production, limited dimensions to save space, possibility to adjust gas supply power, water supply quantity selection, LCD display, NO electrical installation, NO electricity, Pressure switch for protection against water interruptions, Safety valve for protection against high pressure
Liquid Gas Air Heater Thermal Power 10-16KW, Air Supply 300 m3/h, Fuel Consumption 1.16 kg/h, Manual Start, Motor with Thermal Protection, Overheating Thermostat, Variable Heating, With Durable Outer Cover, Easy Maintenance
Gas Air Boiler Suitable for Indoors, Power 35KW, Consumption 2.46kg/h, Thermal Coverage 120m2, with a Maximum Height of 5 Meters so that the heat is spread evenly, High Efficiency with Minimum Noise
The tank is manufactured from linear low density polyethylene (LLDPE) by rotational molding. LLDPE exhibits chemical resistance and is not easily attacked by strong acids and bases.
Gas water heater. Limited dimensions for space saving and low weight. Ease of installation and simplicity of use and maintenance. Automatic ignition by opening the tap through an electronic mechanism. Possibility to adjust gas supply power and without continuous flame - pilot, for economy in use. Selection of water supply quantity to maintain a constant flow in case of changes in supply pressure. Simple and easy to read liquid crystal display. Possibility of choosing to maintain a constant temperature. Requires connection to an electrical installation. Pressure switch to protect against water interruptions. Safety (relief) valve for protection against high pressure.
Air-heated oil heaters of a new generation. The P12 and P14 have 1 two-speed fan to circulate hot air into your space, while the P17 and P20 have 2 two-speed fans, one to distribute hot air and one to the combustion area, increasing their efficiency. The modern and modern design makes them ideal for every home by placing them in all areas. Available in red. Any other coloring is on request.
Liquid Gas Heater Power 4.2KW with 3 Operation Levels (1.4KW, 2.8KW & 4.2KW), Consumption 110-299gr/h, Thermal Coverage 30-60m2, with Automatic Ignition, Energy Class A, Ceramic Burners, Space for Bottle 10kg, 3 Safety Valves (Oxygen Sensor, Drop Sensor & Safety Thermal), Transport Wheels, Stabilization Brake
Wall-Mounted Condensing Gas Boiler with Stainless Steel 4-Phase Alternator, Electronically Controlled Fan, Circulating Inverter, Electronic Display, Thermal Insulation with Aluminum Coating on the Boiler Walls, Possibility of Operation with WiFI Wireless Thermostat, Efficiency up to 108%, Electrical Protection IPX4D
MYTHERM SOLAR HEATER MADE OF STAINLESS STEEL, HIGH STRENGTH STEEL BOILER, DOUBLE ANODIC PROTECTION FROM ELECTROLYSIS
WIRELESS ROOM THERMOSTAT
TEMPERATURE RANGE FROM +5 TO +30 DEGREES
CONNECTION RANGE UP TO 100M
ENERGY CLASS 'A' WOOD STOVE CAPABLE OF COVERING UP TO 80 sq.m.
Indoor gas fireplace. With lava stones. The fire in the fireplace is visible from the front.
RIELLO GULLIVER BS2 35-91KW SINGLE STAGE GAS BURNER
Air/water Inverter Split Heat Pump for heating, cooling and sanitary hot water production, together with Sensys NET System Manager and external sensor for temperature regulation, with Built-in Boiler 180l and expansion tank 8l
High Efficiency Floor Boiler suitable for Oil/Gas Pressurized Burners, 3 Passes for Hot Water Production, with G20 Precast Cast Iron Body, Assembled with Iron Breasts, Strapped, Rockwool Sheet Insulation with Special Tear Protection, with Simple Control Panel with Thermometer