Reference: 02.202.022
CAST IRON WOOD STOVE SUITABLE FOR ENERGY CLASS 'A' INTERIOR SPACES CAPACITY TO COVER SPACES UP TO 80 sq.m.
Send to all Greece
Returns Policy
Use of SSL Encryption
Wood stove TGM-023A from the manufacturer Thermogatz, high energy class "A+". This is an easy and economical solution to heat your home or holiday home. Its installation is simple and low-cost, as is its maintenance. You can even use wood briquettes.
It consists of the combustion chamber, the container for collecting the ash at the bottom, and the chimney. It is placed in any space at a certain distance from a wall, so that the installation of the chimney can be done correctly. As a general rule, the better the space is ventilated, the more efficient and safer the use of the stove will be.
They are cast iron, which means it takes a bit longer to heat up than a steel one. But it has the advantage of giving off this heat that accumulates for a longer time after the fire goes out, keeping the room warm. Cast iron is characterized as the most suitable material for heating devices due to its good thermal conductivity and high heat resistance.
It is suitable to cover the heating of a space from approximately 61 to 80 square meters.
Its degree of efficiency (77%) is the percentage of fuel that is converted into useful heat. The higher the efficiency, the better the stove, since heat losses are reduced.
Instructions for the correct use of the wood stove:
- We use dry wood, at least 2 years old
- We initially place a small amount of wood and increase gradually.
- We clean the surfaces since the wood stove is frozen.
- We clean the glass when it is cold.
- Dry (up to 20% moisture) and dense (olive, oak, fir, beech) woods are much more efficient in combustion.
Features & Dimensions
Total Power: 15kW
Wood consumption: 3kg/h
Chimney diameter: 150mm
Height: 750mm
Width: 720mm
Depth: 420mm
Weight: 115kg
CAST IRON WOOD STOVE SUITABLE FOR ENERGY CLASS 'A' INTERIOR SPACES CAPACITY TO COVER SPACES UP TO 80 sq.m.
Professional Hanging Gas Heater Adjustable Power 8-11 KW, Consumption 0.59-0.79 kg/h, Made in Italy, With Electronic Automatic Ignition, Thermal Coverage 15 m2, Width 80cm, Height 65cm
5.3KW Gas Power Mirror with 3 Ceramic Plates and Manual Ignition
Ceramic Mirror Power 25KW, Consumption 1.76kg/h, Thermal Coverage 30÷55m2, with 12 Infrared Ceramic Plates, 2 Heating Levels, Automatic Ignition, Metal Body, Tilting, Remote Control Operation, Ideal for Professional Spaces such as cafes, restaurants, factories , etc.,
It has a rhostatic switch for the heating fan. It has a 4mm refractory ceramic crystal resistant up to 750°C. 2.5mm steel frame and 25mm SF750 vermiculite in the combustion chamber.
IT HAS A REOSTATIC SWITCH FOR THE HEATING FAN, AN EMMIE OVEN WITH A GRILL PAN AND A THERMOMETER FROM 0-300 DEGREES. REFRACTORY CERAMIC CRYSTAL 4mm RESISTANT UP TO 750 DEGREES. STEEL FRAME 2.5mm AND IN THE COMBUSTION CHAMBER SF750 VERMICULITE 25mm. ASH COLLECTION CONTAINER IN THE BOTTOM PART.
ENAMEL OVEN WITH GRILL PAN AND THERMOMETER FROM 0-300 DEGREES. REFRACTORY CERAMIC CRYSTAL 4mm RESISTANT UP TO 750 DEGREES. STEEL FRAME 2.5mm AND IN THE COMBUSTION CHAMBER SF750 VERMICULITE 25mm. ASH COLLECTION CONTAINER IN THE BOTTOM PART.
2.5mm steel frame and in the combustion chamber, 4mm steel perimeter and 25mm SF750 vermiculite base. Ash collection container (drawer) at the bottom. Boiler test at 4 bar. Refractory ceramic crystal resistant up to 750°C.
4mm steel body. 25mm stone wool insulation around the perimeter and 25mm ceramic wool on top. Boiler test at 5 bar. Ash collection container (drawer) at the bottom. Possibility of connection with a hydrostatic valve (not supplied). Possibility of conversion into a pellet boiler by installing the TORO 40 burner.
Enamel oven, with baking tray, grill and thermometer 0-300°C. Refractory ceramic crystal 4mm resistance up to 750°C. 2.5mm steel frame and 25mm SF750 vermiculite in the combustion chamber. Ash collection container (drawer) at the bottom.
IT HAS A ROOSTATIC SWITCH FOR THE HEATING FAN, 4mm CERAMIC CRYSTAL RESISTANT UP TO 750 DEGREES. IT HAS A 2.5mm STEEL FRAME AND IN THE COMBUSTION SPACE SF750 VERMICULITE 25mm. ASH COLLECTION CONTAINER HER BOTTOM
ENERGY CLASS 'A' CAST IRON WOOD STOVE SUITABLE FOR INDOOR SPACES WITH UP TO (78.8%) COMBUSTION EFFICIENCY CAPABLE OF COVERING UP TO 60 Sq.m.
ENERGY CLASS 'A' WOOD STOVE, ENERGY CLASS 'A', EFFICIENCY LEVEL (77%), COVERAGE OF HEATING SPACES UP TO 80sqm
2.5mm steel frame and in the combustion chamber, 4mm steel perimeter and 25mm SF750 vermiculite base. Ash collection container (drawer) at the bottom. Boiler test at 4 bar. Refractory ceramic crystal resistant up to 750°C.
It has a rhostatic switch for the heating fan. Refractory ceramic crystal 4mm resistance up to 750°C. 2.5mm steel frame and 25mm SF750 vermiculite in the combustion chamber. Ash collection container (drawer) at the bottom.
LOW FUEL CONSUMPTION AND INCREASED DEGREE OF EFFICIENCY. 4mm CERAMIC CRYSTAL REFERENCE UP TO 750 DEGREES, 2.5mm STEEL FRAME AND IN THE COMBUSTION CHAMBER SF750 VERMICULITE 25mm. ASH COLLECTION CONTAINER IN THE BOTTOM PART.
It has a 4mm refractory ceramic crystal resistant up to 750°C. 2.5mm steel frame and 25mm SF750 vermiculite in the combustion chamber.
CAST IRON WOOD STOVE FOR INTERIOR SPACES ENERGY CLASS 'A' THERMAL COVERAGE CAPACITY UP TO 80sqm
LOW FUEL CONSUMPTION AND INCREASED EFFICIENCY. REFRACTORY CERAMIC CRYSTAL 4mm RESISTANT UP TO 750 DEGREES. STEEL FRAME 2.5mm AND IN THE COMBUSTION CHAMBER SF750 VERMICULITE 25mm. ASH COLLECTION CONTAINER IN THE BOTTOM PART.
It has a rhostatic switch for the heating fan. Refractory ceramic crystal 4mm resistance up to 750°C. 2.5mm steel frame and 10mm wrought iron plates in the combustion area. Ash collection container (drawer) at the bottom.