Liquid Gas Air Heater Thermal Power 36-53KW, Air Supply 1,450 m3/h, Fuel Consumption 3.78 kg/h, Motor with Thermal Protection, Overheating Thermostat, Variable Heating, With Durable Outer Cover, Easy Maintenance
Air-heated PELLET Stove Thermal Power 4.3÷14.22KW, with Efficiency Degree 92.04%, Maximum Coverage 265 m3, PELLET Consumption 0.93÷3.04kg/h, with Refractory Ceramic Crystal up to 750°C, Body from 3mm steel and 25mm vermiculite in the Combustion Space, Easy-to-read User Display in 10 Languages, Start and Shutdown Timer, Intelligent Fault Diagnosis System, Two Hot Air Fans, Room Temperature Sensor
High Efficiency Floor Boiler suitable for Oil/Gas Pressurized Burners, 3 Passes for Hot Water Production, with G20 Precast Cast Iron Body, Assembled with Iron Breasts, Strapped, Rockwool Sheet Insulation with Special Tear Protection, with Simple Control Panel with Thermometer
Floor Fan Coil Cooling Power 7.53KW, Thermal Power 15.5KW, Air Flow 1280m3/h, Water Flow (Cooling) 1296 l/h, Water Flow (Heating) 1333 l/h, with Built-in Winter-Summer Thermostat, with Switch 3-Speed and 32°C Temperature Sensor for Connecting to a Heat Pump, with the Possibility of Adjusting the Fan Speeds, the Possibility of Switching the Water Inlet Left-Right During Installation
Thermostat with remote control through the ARISTON NET application and the BridgeNet BUS protocol, System Parameter Setting, with Analog Sensor, Control up to 6 Zones, Protection Function if the temperature drops below 5°C, Compensation Function in combination with the external sensor Gal Evo
5.3KW Gas Power Mirror with 3 Ceramic Plates and Manual Ignition
The tank is manufactured from linear low density polyethylene (LLDPE) by rotational molding. LLDPE exhibits chemical resistance and is not easily attacked by strong acids and bases.
Air-heated oil heaters of a new generation. The P12 and P14 have 1 two-speed fan to circulate hot air into your space, while the P17 and P20 have 2 two-speed fans, one to distribute hot air and one to the combustion area, increasing their efficiency. The modern and modern design makes them ideal for every home by placing them in all areas. Available in red. Any other coloring is on request.
Refractory ceramic (4mm) door glass, resistance up to 750°C. 3mm steel body and 25mm vermiculite in the combustion area. Available in gray color. Any other color combination is on request.
High thermal efficiency, opening & sliding door. One perimeter chamber, two internal chambers with adjustable air & safety key. Construction material is steel with cast-iron panels. 4mm 750ºC ceramic glass, secondary combustion & air curtain.
Wall-Mounted Condensing Gas Boiler with Stainless Steel 4-Phase Alternator, Electronically Controlled Fan, Circulating Inverter, Electronic Display, Thermal Insulation with Aluminum Coating on the Boiler Walls, Possibility of Operation with WiFI Wireless Thermostat, Efficiency up to 108%, Electrical Protection IPX4D
CAST IRON WOOD STOVE FOR INTERIOR SPACES ENERGY CLASS 'A' THERMAL COVERAGE CAPACITY UP TO 80sqm
Burner Two Stage Operation Power with High Quality Materials that guarantee Safe Operation, with a Control Panel with Microprocessor that indicates the operation and Diagnoses the Causes of Errors, with Reduced Noise, Easy to Install and Adjust
Air/water Inverter Split Heat Pump for heating, cooling and sanitary hot water production, together with Sensys NET System Manager and external sensor for temperature regulation, with Built-in Boiler 180l and expansion tank 8l, Three-phase
MYTHERM SOLAR HEATER MADE OF STAINLESS STEEL, HIGH STRENGTH STEEL BOILER, DOUBLE ANODIC PROTECTION FROM ELECTROLYSIS
High Efficiency Floor Boiler for Pressurized Oil Spray (28 or 35sec), forced gas or dual fuel for ON/OFF or High Low Operation
HENRAD AIKMAN 11/500/600 594 KCAL/H INTERNAL LOOP PANEL HEATERS (VENTIL)
Floor Fan Coil Heating Power 3300÷13000 kcal/h, Cooling Power 4800÷21000kcal/h, with 3 Speed Switch, Winter-Hot Switch, Bulb Thermostat, Operation Indicator Lights
Gas Air Boiler Power 20÷84KW, Consumption 1.2÷6.6 kg/h, with Various Capacities and Versions, Intelligent Control System that allows Setting and Controlling the System even Remotely
1000 LITERS SUPER CAPACITY HORIZONTAL LIQUID GAS TANK
PELLET Hydraulic Stove Thermal Power 23+7KW, with Efficiency Degree 90.2%, Maximum Coverage 567 m3, Maximum PELLET Consumption 5.1kg/h, with Refractory Ceramic Crystal up to 750°C, 4mm Steel Body and Steel Combustion Space 4mm, Easy-to-read User Display in 10 Languages, Start and Shutdown Timer, Intelligent Fault Diagnosis System, Can Be Connected Parallel to the Existing Heating System, with 1 Fan That Drives Hot Air to the Front of
Internet Connectable Room Thermostat, With Large TFT Touch Screen, Analog Function, Plug & Play Installation, Outdoor Temperature Via Internet
Liquid Gas Stove Power 4.2KW with 3 Modes of Operation (1.4KW, 2.8KW, 4.2KW), Consumption 305gr/h, Achieves Fast Heating & Energy Saving, Piezoelectric Ignition, With Protection System in case of Ignition Failure or Falling, Space For 15kg Bottle, Transport Wheels, E.O.K. Specifications.
Forced Flow Closed Chamber Gas Instantaneous Water Heater with Hot Water Supply 11÷16 l/min, Power 22÷30 KW, Efficiency >90%, Configuration Ratio 1:3, With a fan that guarantees the Evacuation of the Flue Gases of the Chimney to Provide Absolute Safety From Any Chance of Leakage, LCD Display, Possibility of Solar Integration, Small Size for Space Saving, Italian Design
Liquid Gas Air Heater Thermal Power 36-53KW, Air Supply 1,450 m3/h, Fuel Consumption 3.78 kg/h, Motor with Thermal Protection, Overheating Thermostat, Variable Heating, With Durable Outer Cover, Easy Maintenance
The tank is manufactured from linear low density polyethylene (LLDPE) by rotational molding. LLDPE exhibits chemical resistance and is not easily attacked by strong acids and bases.
High thermal efficiency, opening & sliding door. One perimeter chamber, two internal chambers with adjustable air & safety key. Construction material is steel with cast-iron panels. 4mm 750ºC ceramic glass, secondary combustion & air curtain