Reference: 02.202.023
CAST IRON WOOD STOVE FOR INTERIOR SPACES ENERGY CLASS 'A' THERMAL COVERAGE CAPACITY UP TO 80sqm
Send to all Greece
Returns Policy
Use of SSL Encryption
Wood stove TGM 008A from the manufacturer Thermogatz, high energy class "A+". This is an easy and economical solution to heat your home or holiday home. Its installation is simple and low-cost, as is its maintenance. You can even use wood briquettes.
It consists of the combustion chamber, the container for collecting the ash at the bottom, and the chimney. It is placed in any space at a certain distance from a wall, so that the installation of the chimney can be done correctly. As a general rule, the better the space is ventilated, the more efficient and safer the use of the stove will be.
They are cast iron, which means it takes a bit longer to heat up than a steel one. But it has the advantage of giving off this heat that accumulates for a longer time after the fire goes out, keeping the room warm. Cast iron is characterized as the most suitable material for heating devices due to its good thermal conductivity and high heat resistance.
It is suitable to cover the heating of a space from approximately 61 to 80 square meters.
Its degree of efficiency (72.52%) is the percentage of fuel that is converted into useful heat. The higher the efficiency, the better the stove, since heat losses are reduced.
Instructions for the correct use of the wood stove:
- We use dry wood, at least 2 years old
- We initially place a small amount of wood and increase gradually.
- We clean the surfaces since the wood stove is frozen.
- We clean the glass when it is cold.
- Dry (up to 20% moisture) and dense (olive, oak, fir, beech) woods are much more efficient in combustion.
Features & Dimensions
Total Power: 13kW
Wood consumption: 5.98kg/h
Chimney diameter: 150mm
Height: 750mm
Width: 700mm
Depth: 420mm
Weight: 105kg
CAST IRON WOOD STOVE FOR INTERIOR SPACES ENERGY CLASS 'A' THERMAL COVERAGE CAPACITY UP TO 80sqm
Professional Hanging Gas Heater Adjustable Power 8-11 KW, Consumption 0.59-0.79 kg/h, Made in Italy, With Electronic Automatic Ignition, Thermal Coverage 15 m2, Width 80cm, Height 65cm
Liquid Gas Air Heater Thermal Power 16-33KW, Air Supply 1000 m3/h, Fuel Consumption 2.14 kg/h, Motor with Thermal Protection, Overheating Thermostat, Possibility of Connecting to a Room Thermostat, Variable Heating, With Durable Outer Cover, With Shell not affected from Heat, Easy Maintenance
Hydraulic wood heater with oven. It can heat your space through the radiator circuit. It is simple to install and due to its high performance and special features, it ranks as one of the most useful and economical water heating stoves. The design of the oven is functional and efficient, making cooking easier. It can be connected parallel to the already existing heating system, but also as autonomous heating. Enamel oven, with baking tray, grill and thermometer 0-300°C. 4mm steel body. Ash collection container (drawer) at the bottom. Boiler test at 4 bar. Refractory ceramic crystal 4mm resistance up to 750°C.
LOW FUEL CONSUMPTION AND INCREASED DEGREE OF EFFICIENCY. 4mm CERAMIC CRYSTAL REFERENCE UP TO 750 DEGREES, 2.5mm STEEL FRAME AND IN THE COMBUSTION CHAMBER SF750 VERMICULITE 25mm. ASH COLLECTION CONTAINER IN THE BOTTOM PART.
CAST IRON ENERGY CLASS 'A' WOOD STOVE FOR INTERIOR SPACES WITH COVERAGE CAPACITY UP TO 60sqm
STEEL WOOD HEATERS WITH AN OVEN, IT IS IDEAL FOR WHO WANTS TO COMBINE ITS TRADITIONAL APPEARANCE WITH A MODERN VERSION. THE DESIGN OF THE OVEN IS FUNCTIONAL AND EFFICIENT MAKING THE COOKING WAY EASIER. OVEN WITH GRILL PAN AND THERMOMETER FROM 0-300 DEGREES. REFRACTORY CERAMIC CRYSTAL 4mm RESISTANT UP TO 750 DEGREES. STEEL FRAME 2.5mm AND IN THE COMBUSTION CHAMBER SF750 VERMICULITE 25mm. ASH COLLECTION CONTAINER IN THE BOTTOM PART.
IT HAS A REOSTATIC SWITCH FOR THE HEATING FAN, AN EMMIE OVEN WITH A GRILL PAN AND A THERMOMETER FROM 0-300 DEGREES. REFRACTORY CERAMIC CRYSTAL 4mm RESISTANT UP TO 750 DEGREES. STEEL FRAME 2.5mm AND IN THE COMBUSTION CHAMBER SF750 VERMICULITE 25mm. ASH COLLECTION CONTAINER IN THE BOTTOM PART.
Three-way with electronic control advantages. Easier starting of the boiler, ability to increase temperature in the combustion space. Possibility of conversion into a pellet boiler by installing the TORO 80 burner. The boiler is tested at 6bar. 4mm steel body. 25mm stone wool insulation around the perimeter and 25mm ceramic wool on top. Electronic operation control!
Steel wood heater with rounded front. It is ideal for anyone who wants to heat their space using solid fuels. Refractory ceramic crystal 4mm resistance up to 750°C. 2.5mm steel frame and 10mm wrought iron plates in the combustion area. Ash collection container (drawer) at the bottom.
IT GIVES YOU THE POSSIBILITY TO COOK TWO DISHES AT THE SAME TIME WITH THE MINIMUM POSSIBLE COOKING TIMES. THE DESIGN OF THE OVEN IS FUNCTIONAL AND EFFICIENT, MAKING COOKING WAY EASIER. ENAMEL OVEN WITH GRILL PAN AND THERMOMETER FROM 0-300 DEGREES. REFRACTORY CERAMIC CRYSTAL 4mm RESISTANT UP TO 750 DEGREES. STEEL FRAME 2.5mm AND IN THE COMBUSTION CHAMBER SF750 VERMICULITE 25mm. ASH COLLECTION CONTAINER IN THE BOTTOM PART.
2.5mm steel frame and in the combustion chamber, 4mm steel perimeter and 25mm SF750 vermiculite base. Ash collection container (drawer) at the bottom. Boiler test at 4 bar. Refractory ceramic crystal resistant up to 750°C.
2.5mm steel frame and in the combustion chamber, 4mm steel perimeter and 25mm SF750 vermiculite base. Ash collection container (drawer) at the bottom. Boiler test at 4 bar. Refractory ceramic crystal resistant up to 750°C.
ENERGY CLASS 'A' CAST IRON WOOD STOVE SUITABLE FOR INDOOR SPACES WITH UP TO (78.8%) COMBUSTION EFFICIENCY CAPABLE OF COVERING UP TO 60 Sq.m.
ENAMEL OVEN WITH GRILL PAN AND THERMOMETER FROM 0-300 DEGREES. REFRACTORY CERAMIC CRYSTAL 4mm RESISTANT UP TO 750 DEGREES. STEEL FRAME 2.5mm AND IN THE COMBUSTION CHAMBER SF750 VERMICULITE 25mm. ASH COLLECTION CONTAINER IN THE BOTTOM PART.
It has a rhostatic switch for the heating fan. It has a 4mm refractory ceramic crystal resistant up to 750°C. 2.5mm steel frame and 25mm SF750 vermiculite in the combustion chamber.
It has a rhostatic switch for the heating fan. Refractory ceramic crystal 4mm resistance up to 750°C. 2.5mm steel frame and 25mm SF750 vermiculite in the combustion chamber. Ash collection container (drawer) at the bottom.
It has a 4mm refractory ceramic crystal resistant up to 750°C. 2.5mm steel frame and 25mm SF750 vermiculite in the combustion chamber.
4mm steel body. 25mm stone wool insulation around the perimeter and 25mm ceramic wool on top. Boiler test at 5 bar. Ash collection container (drawer) at the bottom. Possibility of connection with a hydrostatic valve (not supplied). Possibility of conversion into a pellet boiler by installing the TORO 40 burner.
It has a 4mm refractory ceramic crystal resistant up to 750°C. 2.5mm steel frame and 25mm SF750 vermiculite in the combustion chamber.