Two Stage Progressive Operation Gas Burner Power 170÷850KW, with Air and Head Position Adjustment, Easy Maintenance due to Dispersion Unit Position, Rolling Flange, Electric Air Damper, Gas Line with Safety Solenoid Valve, Minimum Gas Pressure Regulator, Pressure Regulator & Filter A element , Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP44
Two-stage progressive or analog operation. (Analog operation is achieved by adding a PID controller and a temperature or pressure sensor that are offered separately.)
Low emissions Low NOx and CO (Class 3).
Ability to achieve optimal combustion values by adjusting air and head position.
Easy maintenance due to the fact that the dispersion unit is accessible without the need to remove the burner from the boiler.
High back pressure with low electrical consumption and low noise level.
Long pipe with rolling flange to adapt the burner to any type of boiler.
Air intake adjustment damper with electric servo motor.
Damper with total block at the burner pauses to reduce thermal losses.
Air intake made of sound-absorbing material, designed for optimal linearity during opening.
CE gas line equipped with: Operating and safety solenoid valve, minimum gas pressure switch, pressure regulator and gas filter.
Possibility of integrating a Leakage Control valve.
Mistake-proof quick connectors for burner and gas line connection.
Gas line connection from below.
Ionization electrode for flame detection and provision for micro-ammeter (mA) connection.
Seven-pole quick connector for electrical and thermostatic connection.
Four-pole quick coupler to control 2nd stage or PID controller.
Degree of electrical protection IP44.
Electric panel made of cast aluminum with electrical protection degree IP55.
General characteristics
Minimum thermal output kW 170
Maximum thermal output kW 850
Minimum delivery kg/h 17.0
Maximum flow rate kg/h 85.0
Motor power kW 1.1
Power supply N 3
Frequency Hz 50
Electrical voltage V 400
Package dimensions mm 1070x800x700
Weight kg 78
05998
20 Items
Data sheet
POWER
170-850 KW
BURNER TYPE
Analog
Specific References
Two Stage Progressive Operation Gas Burner Power 170÷850KW, with Air and Head Position Adjustment, Easy Maintenance due to Dispersion Unit Position, Rolling Flange, Electric Air Damper, Gas Line with Safety Solenoid Valve, Minimum Gas Pressure Regulator, Pressure Regulator & Filter A element , Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP44
Two-Stage Gas Burner Power 170÷850KW, with Air and Head Position Adjustment, Easy Maintenance due to Dispersion Unit Position, Rolling Flange, Electric Air Damper, Gas Line with Safety Solenoid Valve, Minimum Gas Piezostat, Pressure Regulator & Gas Filter, Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP40
DIABLE Burner Burner 240 ÷ 1200KW, with the ability to adjust air and head position, easy maintenance due to the position of the scattering unit, rolling flange, electric air damp, gas line with electromagnetic safety valve, ministers Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP54
DIABILITY GAS Burner 300 ÷ 1500KW, with the ability to adjust air and head position, easy maintenance due to the location of the scattering unit, rolling flange, electric air damp, gas line with electromagnetic safety valve, ministers of gas Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP54
400 ÷ 2100KW Gas Burner, with the ability to adjust air and head position, easy maintenance due to the location of the scattering unit, rolling flange, electric air damp, gas line with electromagnetic safety valve, ministers of gas Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP54
400 ÷ 2500KW Gas Burner, with the ability to adjust air and head position, easy maintenance due to the position of the scattering unit, rolling flange, electric air damp, gas line with electromagnetic safety valve, ministers of gas Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP54
DIABILITY GAS Burner 650 ÷ 3100KW, with the ability to adjust air and head position, easy maintenance due to the location of the scattering unit, rolling flange, electric air damp, gas line with electromagnetic safety valve, ministers of gas Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP54
DIVENTS Burner 900 ÷ 3600KW, with the ability to adjust air and head position, easy maintenance due to the position of the scattering unit, rolling flange, electric air damp, gas line with electromagnetic safety valve, ministers Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP54
Two Stage Progressive Operation Gas Burner Power 60÷205KW, with Air and Head Position Adjustment, Easy Maintenance due to Dispersion Unit Position, Rolling Flange, Electric Air Damper, Gas Line with Safety Solenoid Valve, Minimum Gas Pressure Regulator, Pressure Regulator & Air Filter i , Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP40
Two Stage Progressive Operation Gas Burner Power 80÷410KW, with Air and Head Position Adjustment, Easy Maintenance due to Dispersion Unit Position, Rolling Flange, Electric Air Damper, Gas Line with Safety Solenoid Valve, Minimum Gas Pressure Regulator, Pressure Regulator & Air Filter i , Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP40
Two-Stage Progressive Operation Gas Burner Power 100÷450KW, with Air and Head Position Adjustment, Easy Maintenance due to Dispersion Unit Position, Rolling Flange, Electric Air Damper, Gas Line with Safety Solenoid Valve, Minimum Gas Pressure Regulator, Pressure Regulator & Filter A element , Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP44
Two Stage Progressive Operation Gas Burner Power 120÷600KW, with Air and Head Position Adjustment, Easy Maintenance due to Dispersion Unit Position, Rolling Flange, Electric Air Damper, Gas Line with Safety Solenoid Valve, Minimum Gas Pressure Regulator, Pressure Regulator & Filter A element , Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP40
DIABLE Burner Burner 240 ÷ 1200KW, with the ability to adjust air and head position, easy maintenance due to the position of the scattering unit, rolling flange, electric air damp, gas line with electromagnetic safety valve, ministers Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP44
DIABILITY GAS Burner 300 ÷ 1500KW, with the ability to adjust air and head position, easy maintenance due to the location of the scattering unit, rolling flange, electric air damp, gas line with electromagnetic safety valve, ministers of gas Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP44
400 ÷ 2100KW Gas Burner, with the ability to adjust air and head position, easy maintenance due to the location of the scattering unit, rolling flange, electric air damp, gas line with electromagnetic safety valve, ministers of gas Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP44
Two Stage Progressive Operation Gas Burner Power 170÷850KW, with Air and Head Position Adjustment, Easy Maintenance due to Dispersion Unit Position, Rolling Flange, Electric Air Damper, Gas Line with Safety Solenoid Valve, Minimum Gas Pressure Regulator, Pressure Regulator & Filter A element , Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP44
Single Stage Gas Burner Power 16.6÷280KW, with Air and Head Position Adjustment, Easy Maintenance due to Dispersion Unit Position, Rolling Flange, Mechanical Air Damper, Gas Line with Safety Solenoid Valve, Minimum Gas Pressure Regulator, Pressure Regulator & Filter Gas, Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, IP40
Single Stage Gas Burner Power 16.6÷280KW, with Air and Head Position Adjustment, Easy Maintenance due to Dispersion Unit Position, Rolling Flange, Mechanical Air Damper, Gas Line with Safety Solenoid Valve, Minimum Gas Pressure Regulator, Pressure Regulator & Filter Gas, Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, IP40
DIABLE Burner Burner 240 ÷ 1200KW, with the ability to adjust air and head position, easy maintenance due to the position of the scattering unit, rolling flange, electric air damp, gas line with electromagnetic safety valve, ministers Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP54
DIABILITY GAS Burner 300 ÷ 1500KW, with the ability to adjust air and head position, easy maintenance due to the location of the scattering unit, rolling flange, electric air damp, gas line with electromagnetic safety valve, ministers of gas Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP44
290-2290KW Power Two-Stage Progressive Burner with High Quality Materials Guarantees Safe Operation, with a Microprocessor Control Panel that indicates the operation and Diagnoses the Causes of Errors, with Reduced Noise, Easy to Install and Adjust
Two-Stage Gas Burner Power 16.6÷280KW, with Air and Head Position Adjustment, Easy Maintenance due to Dispersion Unit Position, Rolling Flange, Mechanical Air Damper, Gas Line with Safety Solenoid Valve, Minimum Gas Pressure Regulator, Pressure Regulator & Filter Gas, Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, IP40
Analog Operation Burner Power 76-2400KW with High Level Materials Quality Guarantees Safe Operation, with Microprocessor Control Panel that indicates the operation and Diagnoses the Causes of Errors, with Reduced Noise, Easy to Install and Adjust
Single Stage Gas Burner Power 16.6÷280KW, with Air and Head Position Adjustment, Easy Maintenance due to Dispersion Unit Position, Rolling Flange, Mechanical Air Damper, Gas Line with Safety Solenoid Valve, Minimum Gas Pressure Regulator, Pressure Regulator & Filter Gas, Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, IP40
Burner Two Stage Operation Power with High Quality Materials that guarantee Safe Operation, with a Control Panel with Microprocessor that indicates the operation and Diagnoses the Causes of Errors, with Reduced Noise, Easy to Install and Adjust
Two-Stage Gas Burner Power 170÷850KW, with Air and Head Position Adjustment, Easy Maintenance due to Dispersion Unit Position, Rolling Flange, Electric Air Damper, Gas Line with Safety Solenoid Valve, Minimum Gas Piezostat, Pressure Regulator & Gas Filter, Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, Four Pole Coupler for 2nd Stage, IP40
Single Stage Gas Burner Power 16.6÷280KW, with Air and Head Position Adjustment, Easy Maintenance due to Dispersion Unit Position, Rolling Flange, Mechanical Air Damper, Gas Line with Safety Solenoid Valve, Minimum Gas Pressure Regulator, Pressure Regulator & Filter Gas, Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, IP40
Two-Stage Gas Burner Power 16.6÷280KW, with Air and Head Position Adjustment, Easy Maintenance due to Dispersion Unit Position, Rolling Flange, Mechanical Air Damper, Gas Line with Safety Solenoid Valve, Minimum Gas Pressure Regulator, Pressure Regulator & Filter Gas, Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, IP40
Two-Stage Gas Burner Power 16.6÷280KW, with Air and Head Position Adjustment, Easy Maintenance due to Dispersion Unit Position, Rolling Flange, Mechanical Air Damper, Gas Line with Safety Solenoid Valve, Minimum Gas Pressure Regulator, Pressure Regulator & Filter Gas, Ionization Electrode for Flame Detection, Seven Pole Quick Coupler, IP40
