COMFORT OF HOT WATER USE
• Stainless steel plate water exchanger
• Service water supply 13.1 liters / minute with ∆T = 25°C (24kW)
THERMAL COMFORT
• Performance up to 108% with energy savings of up to 35%
• 4-star combustion performance compliant with EN92/42 standard
• Modulation range from 25% to 100% of maximum power
• Condensing exchanger made of aluminum alloy
• Gas conversion with kit
• Reduced emissions, NOx Class 5
• High performance circulator with configuration that continues to improve acoustic comfort and reduce power consumption
• Designed for integration into a heating system via Ebus2 communication protocol (boilers, solar modules and system management accessories)
• Possibility of managing single and multiple temperature heating zones only through Expert Control
• Self-diagnosis system through codes
• LCD screen
CONVENIENCE OF OPERATION AND INSTALLATION
• Connection to an external sensor
• Compatible with Expert Control, configuration and on/off accessories
• Easier start-up: Automatic cleaning function and direct access to combustion regulation
ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT
• Up to 20% energy savings with Expert Control and SRA function
• Up to 35% savings in combination with an on/off thermostat and an external sensor
• 40% reduction in CO2 emissions compared to a conventional boiler
Technical Characteristics INOA GREEN 24
Max./Min. nominal efficiency of Domestic Hot Water Qn (KW): 23.5/4.5
Max./Min. Useful Power (80°C-60°C) Pn (KW):23/4.4
Max./Min. Useful Power (50°C-30°C) Pn (KW):23/4.4
Max./Min. Useful Power of Hot Water Use Pn (KW): 22.9/4.4
Combustion Efficiency (in Smoke): 98.2%
Performance at nominal Thermal Performance (60/80°C)Hi/Hs:97.7/88
Performance at nominal Thermal Performance (30/50°C)Hi/Hs:104.3/94
Efficiency at 30% at 30°C Hi/Hs:108.2%
Performance at minimum thermal performance (60/80°C) Hi/Hs: 97/87.3%
Performance Stars:****
Class: A
Shutdown Loss(ΔT=30°C):0.2%
Loss in smoke level with the burner in operation: 1.8%
Pressure before filling expansion tank: 1 bar
Maximum Heating Pressure: 3 bar
Expansion tank capacity: 8 l
Min/Max heating temperature (high temperature area): 35/82°C
Min/Max heating temperature (low temperature area): 25/45°C
Min/Max domestic hot water temperature: 36/60°C
DHW storage cylinder capacity: 10.3 l/m
Special Supply in domestic hot water (ΔT=30°C) 13.9 l/m
Amount of hot water ΔT=25°C: 9.9 l/m
Hot water comfort stars (ΕΝ13203): <2 l/m
Minimum hot water supply: 7/0.3 bar
Max/Min domestic hot water pressure: 60°C
Net discharge pressure: 100 Pa
Class NoX:5 IP
Exhaust gas temperature (G20) (80°C-60°C):58°C
CO2 content (G20) (80°C-60°C):9.4%
CO content (0%O2) (80°C-60°C):192ppm
O2 content (G20) (80°C-60°C):3.8%
Maximum exhaust gas flow (G20) (80°C-60°C): 37.3 kg/h
Excess air (80°C-60°C):22%
Supply voltage/frequency: 230/50 V/Hz
Total absorbed electrical power: 87 W
Minimum ambient temperature for use: +5°C
Protection level of the electrical installation IPX5D
Width x Height x Depth: 745x400x315mm
Weight: 24kg
