Cares Premium EU with full condensation technology provides a new comfort experience with the assurance of Ariston quality:
-Multifunction LCD display
-External combustion analysis port
- Filters at the cold water inlet and at the KTH return
-Vaeration function of the heating circuit
-Dual alternator technology
-Larger expansion tank
-Built-in minimum pressure switch
-Muffler with innovative design
-Self-diagnosis system through codes
-Provisions against ice, fouling and blocking of the pump
Up to 35% energy savings
Thanks to its unique full condensing technology, Cares Premium can and does provide up to 35% savings on the energy bill compared to a 10 year old conventional boiler and by adjusting the plumbing connections.
Quality first
All Ariston boilers must pass 155 strict quality checks throughout their production. In addition, Cares Premium was tested in Italy for 11,000 hours under the most difficult operating conditions to ensure greater reliability, expressing the superiority of unique Italian design. Thanks to its innovative construction and new materials, Cares Premium is more robust and more durable over time.
Ease of use and maintenance
With the new LCD display, the use and operation of Cares Premium becomes immediate and simple. The new internal layout allows easier and faster installation and maintenance. In addition, with the Ariston Net application in combination with the Sensys Net thermostat, you manage the boiler more efficiently.
TECHNICAL SPECIFICATIONS ARISTON CARES PREMIUM EU 30
POWER SPECIFICATIONS
Max/min nominal thermal output (Pci) Qn: 29.0/6.0kW
Max/min nominal thermal output (Pcs) Qn: 32.2/6.7kW
Max/min nominal thermal output ZNX (Pci) Qn: 29.0/6.0kW
Max/min nominal thermal output ZNX (Pcs) Qn: 32.2/6.7kW
Max/min output power (80°C-60°C) Pn: 28.4/5.8kW
Max/min output power (50°C-30°C) Pn: 30.2/6.4kW
Combustion efficiency (in exhaust gases): 98%
Nominal thermal efficiency (60/80°C) Hi/Hs: 97.8/88.0%
Nominal thermal efficiency (30/50°C) Hi/Hs: 104.0/93.7%
Efficiency at 30% at 30°C (condensing) Hi/Hs: 108.0/97.3%
Minimum thermal efficiency (60/80°C) Hi/Hs: 96.0/86.4%
Performance evaluation (directive 92/42/EEC): **** stars
Gas burner loss during operation: 0.2%
shows
Available air pressure: 100Pa
NOx class: 6 class
Exhaust temperature (G20) (80°C-60°C): 61°C
CO content (0%02) (80°-60°C): 177ppm
Maximum flue gas flow (G20) (80°-60°C): 46 kg/h
Excess air (80°-60°C): 23%
HEATING CIRCUIT
Expansion tank inflation pressure: 1bar
Maximum heating pressure: 3 bar
Expansion tank capacity: 8l
Min/max heating temperature (high temperature range): 35/82°C
Min/max heating temperature (low temperature range): 20/45°C
DOMESTIC HOT WATER
Max/min domestic hot water temperature: 60/36°C
Typical hot water flow rate (ΔT=30°C): 13.2 lt/min
Amount of hot water ΔT=25°C: 16.3 l/min
Amount of hot water ΔT=35°C: 11.6 l/min
Hot water comfort rating (EN13203): ***stars
Minimum hot water flow rate: >2 l/min
Max/min hot water pressure: 7/0.3 bar
ELECTRICAL
Power supply frequency/voltage: 230/50 V/Hz
Total absorbed electrical power: 81W
Minimum ambient temperature: 0°C
Protection level for electrical device: X5DIP
Weight: - kg
