The top of the condensing boiler range, Italian design and connectivity
New XtraTech ™ * stainless steel heat exchanger exclusively from Ariston
Heat exchanger flow sections +142% compared to the previous version
A chimney suitable for the model is included
Dimensions (L X H X D): 315X745X400mm
ENERGY EFFICIENCY
Energy Class A+ achieved by thermoregulation.
1:10 aspect ratio
Gas conversion, from the technician menu
DESIGN AND TECHNOLOGY
Large touch screen
Ignition system, electronic combustion control
BusBridgeNet communication protocol
AUTO, Comfort functions
New CARE function, automatic notification of scheduled maintenance
Ariston NET connectivity is achieved with Cube S NET, Sensys NET thermostats
COMFORT
Maximum quietness and acoustic comfort will be in your home. The Genus One has a new optimized muffler, panel sound insulation, and very few cycles thanks to the full analog modulation pump.
Very precise power regulation according to the actual heating need thanks to the 1:10 modulation ratio.
Compatibility with thermoregulation accessories and the AUTO function avoid temperature fluctuations and peaks, giving a constant temperature for maximum thermal comfort.
"Comfort Mode" gives instant hot water, for 30' after the first draw, eliminating waiting times. More hot water is delivered thanks to the large hot water exchanger.
QUALITY
Genus One is manufactured with the best materials available: stainless steel, used in both heat exchangers guarantees high fidelity and a very long life cycle.
The addition of a heating return filter guarantees the protection of the boiler from the accumulation of impurities in the water.
The use of anti-sticking systems prevents frost and scale build-up protecting not only the boiler but also the entire system.
External combustion analysis port allows easy control of combustion quality.
The built-in low pressure sensor protects the boiler in low water pressure conditions.
specifications
POWER SPECIFICATIONS
Max/min nominal thermal output (Pci) Qn: 22.0/2.5kW
Max/min rated thermal output (Pcs) Qn: 24.4/2.8kW
Max/min nominal thermal output ZNX (Pci) Qn: 26.0/2.5kW
Max/min nominal thermal output ZNX (Pcs) Qn: 28.9/2.8kW
Max/min output power (80°C-60°C) Pn: 21.5/2.3kW
Max/min output power (50°C-30°C) Pn: 23.6/2.6kW
Combustion efficiency (in exhaust gases): 97.4%
Nominal thermal efficiency (60/80°C) Hi/Hs: 97.7/87.9%
Nominal thermal efficiency (30/50°C) Hi/Hs: 107.4/96.7%
Efficiency at 30% at 30°C (condensing) Hi/Hs: 109.6/98.9%
Minimum Thermal Efficiency (60/80°C) Hi/Hs: 91.1/82.0%
Performance evaluation (directive 92/42/EEC): **** stars
Gas burner loss during operation: 2.6%
shows
Available air pressure: 100Pa
NOx class: 5 class
Exhaust temperature (G20) (80°C-60°C): 70°C
CO2 content (G20) (80°-60°C): 8.8%
CO content (0%02) (80°-60°C): 80.1ppm
Maximum exhaust gas flow (G20) (80°-60°C): 44.9 kg/h
Excess air (80°-60°C): 34%
HEATING CIRCUIT
Expansion tank inflation pressure: 1bar
Maximum heating pressure: 3 bar
Expansion tank capacity: 8l
Min/max heating temperature (high temperature range): 35/82°C
Min/max heating temperature (low temperature range): 20/45°C
DOMESTIC HOT WATER
Max/min domestic hot water temperature: 36/60°C
Typical hot water flow rate (ΔT=30°C): 12.8 lt/min
Amount of hot water ΔT=25°C: 15.4 l/min
Amount of hot water ΔT=35°C: 11.0 l/min
Hot water comfort rating (EN13203): ***stars
Minimum hot water flow rate: 2 l/min
Max/min hot water pressure: 7/0.2 bar
ELECTRICAL
Power supply frequency/voltage: 230/50 V/Hz
Total absorbed electrical power: 80W
Minimum ambient temperature: >0°C
Protection level for electrical device: X5DIP
Weight: 32.7kg
